Product Description
The Blue Jenny Module stacker holds up to three Blue Jenny wire spinners to enable multiple wires to be run at the same time. If you need to run more than three wires you can sit extra spinners nearby or run two stackers side by side.
The magazine style loading means you can load one spinner at a time regardless of how much wire remains in the other spinners.
Blue Jenny wire spinners in module stackers.
Product Description
The PR25 Front Roller is a bolt-on addition to the front of the PR25 post rack system. Ideal for situations where your wire spinners are offset to the position of the post racks and the wires may jam on the posts due to change of angle.
PR25 with roller at front.
Product Description
Our Hinged-Joint Strainer is designed to tension long runs of hinged-joint fence without slipping on the line wires. Designed to overcome the slippage inherent in many commercially available straining products, our system utilises individual clamping jaws for each line wire. The maximum capacity of the strainer is any hinged joint up to 900mm high. For high feral exclusion fences, two strainers can be bolted together.
Hinged Joint Strainers.
Product Description
The Australian designed and made “Speed Guide” is a simple attachment to the front of standard air-operated clip guns used in clipping netting or hinged joint fences. Using this system, we have been able to double the rate of clipping along the line. The straightforward design cuts down on the need to manually hold wires together whilst clipping, and reduces the time needed to aim the clip gun. The guide is supplied with an Allen key and spanner to attach onto your gun.
Clip gun speed guide.