Multi Post Marchant Air Hammer Guide
Multi Post Marchant Air Hammer Guide

Multi Post Marchant Air Hammer Guide

Supplied on Order

Our popular Air Hammer Guide is designed as an aftermarket adapter to suit current-model Marchant air hammers.

Primary advantages:

  • No need to swap between maxY/standard air hammers - one tool does both jobs. Standard and MaxY posts can be installed on the same pass.
  • The locking-blade design enables the operator to prevent posts from twisting when being driven
  • Running a top wire through our PR25 post racks is straightforward, as the Air Hammer Guide does not cover or foul the top wire.
  • Tested on Whites/Waratah standard and Beefy/MaxY posts. Will also suit Clipex posts.
  • We have used this product in the field and the efficiency gains are substantial, with no need to carry two air hammers or swap guides constantly. Used in conjunction with our air hammer lifter, it creates an easier fencing construction process with very low physical impact on the operator.

Correct model Marchant Air Hammer: Picket Post Driver - 'Standard' code 1021 with  50mm Dolly. 

Note: will not fit on air hammers older than approximately the year 2000 with a 74mm ID guide.