Videos

We’re in beautiful Tasmania for this special episode of How To Do It, showing you exactly how to fit a Walters Fencing stay to a timber post. Join us on Yuri and Monica's property, surrounded by incredible views and the rustic charm of Felon’s Corner - a stunning Airbnb tucked into the Tasmanian landscape. In this step-by-step video, we’ll walk you through everything you need to know to install a timber post stay.

In this video, we break down one of the most common questions in rural fencing: should you use one stay or two in your fence corner assembly? We take a look at the Walters Fencing Stay system and explain how the design performs under load. We also go over corner stay configurations, when to use one stay vs two, and how to install them for maximum strength and efficiency. Whether you're a fencing contractor, DIY farmer, or just planning your next fence project, this guide will help you make the right call on your corner assemblies.

In less than 3 minutes you can have a fully assembled Walters Fencing Stay installed! Steve runs through some detail on how to get this done.

This episode is about a fun but challenging animal enclosure project. Steve goes into detail about the process of building this fence and the final result!

Steve runs us through the little updates for the Contractor Model Wire Winder. We've made two of the cradle tabs slightly longer to make the side plate easier to put back on, and a few other bits and pieces. Enjoy! 🤠

The Double Barb Dispenser allows you to run out 2x barbed wire rolls from your towbar or the tray of your ute / trailer. Featuring two tapered spikes to deal with any obstructions in the centre of the barb rolls, a flared bottom which allows the barb to nest nicely, providing a constant (slight) drag to reduce over/underspin, all mounted onto a crosspiece that fits into your towbar. You can also choose to receive it with the mounting sleeve which you can weld onto your tray / trailer or wherever you see fit. The mounting sleeve allows you to slide the Double Barb Dispenser in and lock it with a pin for use outside of your towbar. Go on, do it...

Steve and the crew run a workshop on the tips, tricks, in's and out's of building a fence! There's a lot of content that wasn't filmed, so if you want to know more, just let us know 🤠

The Walters Fencing 4m x 2m Flat Bed Trailer with a prototype Weston Dropper Rack in action. We're still working out the kinks of the rack, a few design changes are needed but we'll have something ready for you all soon!

Clancy goes into detail on Australia's best wire spinner, the Blue Jen II. If you have any questions, just let us know!

In this video, we cover how to install netting flood curtains! Hope you enjoy 🤩

The crew walk us through how we drive strainer posts in a straight line, the challenges you face and what to look for. What would you like to see next? 😎

So many different ways to do it, this is another look at how to fence through a gully (bigger gully this time). We're open to trying different styles of fence, what do you think about this one?