Walters Fencing Stay

1-9 ($154.00ea inc GST)
10pack ($121.00ea inc GST)
30pack ($110.00ea inc GST)
60pack ($104.50ea inc GST)
120pack ($99.00ea inc GST)

The Walters Fencing Stay is a modernised tieback stay, 30+ years of our research on stay designs have produced what we believe to be the best (and easiest) tieback stay system commercially available.

• Tieback design places the strainer post under active compression - while your wire pulls against the post the stay is pushing back against the wire's force. 
• 50nb diagonal gal stay pipe
• 32MPA reinforced concrete stay pad with a raised 'H' profile for added strength.
• 12mm zinc plated tie back threaded rod. 
• Includes stay points, bolts and nuts. 
• Works on all sizes of hollow pipe 80nb or larger.
• A slot in the bottom of the 50nb pipe allows the threaded rod to be inserted it, which means when the stay is tightened, the tube is under both compression and tension at the same time, far reducing the effect of bowing or deforming under pressure compared to a conventional stay where the rod is fastened the tube.
• Stay pad design is registered - Australian Design Number 202510189.

To install, drill two 13mm holes and insert the Bolt Setter through the bottom hole. Thread the coupling nut onto the bolt and threaded rod, then attach the stay using the stay points A&B. Locate the stay tube in the pad and tighten! See instruction manual and video below for more information. 

Note: The Bolt Setting Tool will be sent free with each order of 10 or more stays, it is required to be purchased for orders of 1-9 stays.